DSL Filters

2Wire 2-Line Inline DSL Filters are for two line telephones or phoneline devices (such as fax machines, answering machines, and analog computer modems). The 2-line Inline filter installs easily between the phone jack and telephone device. Once the filter is installed, telephone devices will be completely isolated from the DSL frequency spectrum, resulting in clear phone service. Eliminate Interference Ensures optimized DSL connections and "total isolation" of analog noise, interference, and modem errors.

Compatible Complies with G.lite ADSL, Full-Rate G.dmt, final T1/E1 specification, and HPNA version 1.0 and 2.0 technologies. Connect Multiple Filters. Supports up to five (5) phone filters without any degradation in line quality. Technical Specifications All 2Wire DSL filters ensure optimized DSL connections and "total isolation" of analog noise, interference, and modem errors.

• 2Wire DSL filters can be used with telephones, fax machines, and analog modems that share a DSL line or use home computer networks (HPNA), or both.
• Use one filter for each telephone device. If several devices are connected to the same telephone wall jack, use only one filter between the first device and the wall jack.
• Complies with Full Rate G.dmt (G.992.1) and G.lite (G992.2) ADSL.
• Complies with the final T1/E1 specification.

  We are a distributor of broadband DSL filters and splitters from the innovators and leaders in broadband technology - Bourns, Pulse/Excelsus, Tii Network Technologies, 2Wire and Wilcom. Separating the DSL signal from the telephone service requires either a splitter in or near the NID or DSL filter at each device. DSL filters (micro-filters) are available for one and two line POTS/telephone installations. For DSL splitters please visit: DSL/ADSL/VDSL splitters

NOTE:
  If DSL filters are used instead of a splitter, a maximum of five phone devices with filters can be used before they begin to excessively degrade the DSL signal.